The B135C Ford Code is an error code that is related to the Heater Element Circuit Short. This code can cause the engine light to be illuminated, and can lead to other issues with the vehicle.
In order to properly diagnose and repair this code, it is important to understand the possible causes, symptoms, and possible solutions.
This article will provide an overview of the B135C Ford Code, helping you to understand the meaning of the code and providing tips on how to properly diagnose and repair it.
Key Takeaways
- The B135C Ford code is related to a short circuit in the heater element circuit of the steering wheel.
- Possible causes of the code include a faulty steering wheel, open or shorted wiring harness, poor electrical connection, faulty clockspring, or a faulty Heated Steering Wheel Module (HSWM).
- It is recommended to visually inspect the wiring harness and connectors, check for damaged components or connector pins, and search for any relevant safety recalls or factory service bulletins from Ford.
- Professional assistance may be required to diagnose and fix the issue, and the cost of diagnosis can vary depending on the location, make and model of the vehicle, and engine type.
What Is the B135C Ford Code
The B135C Ford Code is related to a short to ground or voltage in the steering wheel heating element output circuit. This code is set by the OBDII system when the HSWM detects a current draw that is out of range.
To fix the B135C code, it is important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins. It is also necessary to check for factory service bulletins from Ford.
It is best to seek professional assistance to ensure the problem is resolved correctly. Diagnosis time and labor rates vary depending on the vehicle, engine type, and location.
Diagnosing the Issue
Diagnosing the issue of a B135C Ford Code requires inspecting the related wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins, and checking for factory service bulletins. It is important to be accurate, analytical, and detail-oriented in order to identify and correct the issue.
If any damaged components are detected, they should be replaced. Additionally, the steering wheel heating element output should be disabled until the ignition is cycled, and the OBDII code should be set if there is a short to ground or voltage in the steering wheel heating element output circuit.
Properly diagnosing the issue can help drivers feel more secure and confident in their vehicle’s performance.
Fixing the B135C Ford Code
Identifying and repairing the issue with the Heated Steering Wheel Module can help drivers ensure the safety and reliability of their vehicle.
To do this, professionals should visually inspect the related wiring harness and connectors for damage, broken, bent, pushed out, or corroded connector pins.
They should also check for factory service bulletins from Ford. Labor costs and diagnosis time may vary, but typically cost between $75 and $150 per hour.
To fix the B135C Ford code, technicians should check for safety recalls and replace any faulty components, such as the steering wheel, clockspring, and HSWM.
The engine light may be an indication of this issue, and the output voltage will be disabled until the ignition is cycled.
Video Help for a Ford Heated Steering Wheel
I wanted to share a related video I found from the Youtuber Stupid Fast Truck and he shows how to do a full installation of a Ford heated steering wheel. He does it on his Ford F-150, but this should give anyone with a Ford the ability to better understand the workings behind the B135C Ford Code. This video is only 9 minutes long, click the red play button below to watch it.
Frequently Asked Questions
How Long Does It Take to Diagnose and Fix the B135C Ford Code?
It typically takes 1 hour to diagnose and fix the B135C Ford Code. Professional assistance is recommended as the issue can be complex and time consuming. Visually inspect all related wiring harnesses and connectors, check for damaged components, and look for broken or corroded connections. Factory Service Bulletins may also provide additional assistance.
Is the B135C Ford Code Covered Under the Vehicle Warranty?
The B135C code is dependent on the make and model of the vehicle. It is possible for the code to be covered under the vehicle warranty, however, it is important to check with the manufacturer for more details.
How Much Does It Cost to Diagnose and Fix the B135C Ford Code?
The cost to diagnose and fix the B135C Ford Code may vary depending on location, make and model of the vehicle, and engine type. Most auto repair shops charge between $75 and $150 per hour.
Are There Any Other Potential Causes of the B135C Ford Code Besides the Ones Listed in the Article?
Yes, there are other potential causes of the B135C Ford Code, such as a faulty clockspring, open or shorted steering wheel harness, poor electrical connection, and a faulty Heated Steering Wheel Module (HSWM). Additionally, it is important to check for Safety Recalls and Factory Service Bulletins from Ford.
What Are the Potential Symptoms of the B135C Ford Code?
The potential symptoms of the B135C Ford Code include an illuminated Engine Light or Service Engine Soon Warning Light.
Final Thoughts
The B135C Ford Code is a Heater Element Circuit Short error code that can cause the engine light to be illuminated. Proper diagnosis and repair of this code requires an understanding of the possible causes, symptoms, and solutions.
Diagnosing the issue involves checking the related circuits and components for issues, and fixing the code involves repairing or replacing components as necessary.
Following the correct procedures and using the right parts will help ensure a successful repair and prevent future issues.
